wooden plug

What is a wooden plug

The plug is a hard wood cylinder, normally beech, of 6-8-10 or more millimeters of from 20 to 60 millimeters in diameter and of variable length. The wooden pins are also commercially available under the form of bars of 1 meter length, from which are cut to the desired length.

The pinning is a very effective technique, usable with different types of wood, from solid to chipboard, which guarantees solid and invisible union between the different parts of a mobile. On the two pieces to be joined are practiced the holes where the plugs are inserted, making solid junction by gluing. Crucial in the process is the accuracy.

Nastrispine produces plugs for the assembly of furniture in 3 different types for cost and seal.

Godrun

High-sealing plug with helix-shaped grooves, made of acacia / locust or on request Beech. The particular process, characterized by the presence of transverse notches, provides excellent resistance to traction. Suitable in all cases of high stress, is preferred, for example, in the construction of windows and doors.

Godrun technical data.

Godrun plugs are produced and marketed both by the linear meter and in the sizes shown in the table.

  • the plugs per linear meter are supplied in bundles of 50/100 pcs.
  • the cut pins are supplied in packs of 1000 pcs. or in boxes of kg. 10.

Made in acacia and, on request, in beech.

Fresun

Spike for normal use with longitudinal grooves, made of beech and acacia / locust. Reference product type in the assembly of furniture, it is preferred for the reduced cost.

Fresun technical data

Fresun plugs are produced and marketed both by the linear meter and in the sizes shown in the table.

  • the plugs per linear meter are supplied in bundles of 50/100 pcs.
  • the cut pins are supplied in packs of 1000 pcs. or in boxes of 10 kg.

Made in both beech and acacia.

Fresun a Doppio Collare

Fresun type plug with circular grooves on both ends. This process guarantees greater sealing during assembly: the glue forms a ring on the milling that prevents it from slipping out of the hole.

Used with lengths greater than 50mm, it is usually used to join chipboard panels. It is preferred to traditional plugs for their greater sealing, with a slightly higher cost.

Fresun a Doppio Collare techinical data

These pins are produced only in the cut to size version, both in beech and acacia, in diameters 8-10.

Available in the standard 8 × 60 version and, on request, in the desired length.